Find A Product
Ref : 1241674 - TILT&LIFT 25 WF Zigbee CENT UN
TILT & LIFT 25 ZIGBEE
Tilt & Lift 25 WireFree Zigbee is a dual-shaft smart motor, specifically designed for cord lift applications.
| Application | ||
|---|---|---|
| Interior blinds | ||
| Technology | Warranty | |
| Zigbee | 5 Years | |
Product benefits
-
Bi-directional feedback (know the motors position and battery level from TaHoma by Somfy application) anytime, anywhere
-
Central Position
-
Soft Start, Soft stop
-
Adjustable speed (18 - 30 rpm)
-
Powered by rechargable external lithium li-ion battery pack
-
Information feedback (LED)
-
Adjustable tilting speed (10 - 20rpm)
-
Designed for silence
-
Compatible with TaHoma switch
-
Compatible with the Zigbee WireFree Solar Panel (Available Semester 2, 2024)
-
Compatible with other Zigbee 3.0 brands thanks to TaHoma switch
- Not compatible with Apple homekit
Other documents & links
Install
Others
- Zigbee Mesh Network Summary Download File
- Tilt & Lift 25 Zigbee TDS Download File
- Tilt & Lift 25 Zigbee Instruction Guide Download File
- Somfy Smart Shading Standalone Commissioning Guide Download File
- Zigbee WireFree Compatibility Matrix Download File
- Tilt & Lift 25 Zigbee Safety Leaflet Download File
- Li-ion Zigbee Charger - Technical Data Sheet Download File
Technical information
End product |
|
|---|---|
| End product type | Internal Venetian Blinds |
Technology |
|
|---|---|
| Radio Frequency | 2.4 GHz (Zigbee) MHz |
| Number of cycles per day | 1 cycles |
| Range in house | 7m (Extendable with Zigbee Repeaters) |
Electrical |
|
|---|---|
| Antenna | External Antenna 12cm |
| Consumption in standby mode | 0.001 W |
| Consumption during operation | 10.2 W |
| Minimum voltage | 10.5 V |
| Maximum Voltage | 16.5 V |
| Rated current | 0.85 A |
| Nominal Voltage / Frequency | DC - 12V |
Mechanical |
|
|---|---|
| Capacity of the limit switch unit | 100 turns |
| Type of limit switch unit | Electronic & bi-directional radio |
| Nominal Speed | 30rpm (nominal speed) Adjustable from 18 - 30 rpm |
| Nominal Torque | 0.8 Nm |
Standard |
|
|---|---|
| Approval | RCM |
| Protection Index | IP 20 (for indoor use only) |
| Insulation class | III |
Cable |
|
|---|---|
| Wire section | 0.21 mm² |
| Number of wires of the cable | 2 |
Dimension |
|
|---|---|
| Weight | 0.19 Kg |
| Diameter | 24 mm |
| Overall length (L3) | 197 mm |
| Basic crown for tube diameter | 24 mm |
| Length (L1) | 207mm (with accessories) / 197mm (without accessories) mm |
Other |
|
|---|---|
| Thermal time | 4 mn |
| Noise level (according to Somfy measures) | 46 (at nominal speed) dBA |
| Working temperature | 0°C to 60 °C |
| Thermal tripping | To retain the motor’s battery lifespan, Somfy recommends recharging the battery at least once every 12 months, even if power remains. If the battery goes flat, recharge it immediately. Leaving a battery fully discharged for more than two months may irreparably damage its ability to recharge. °C |